Introducing

GeoStudio 2016

From run-of-the-mill to one-of-a-kind, you can use GeoStudio to tackle nearly any geotechnical problem. Learn why GeoStudio is used in over 100 countries by engineers, researchers, regulators, professors and students.

SEE WHAT'S NEW

Solutions

GeoStudio's integrated products enable you to work across a broad range of engineering use cases.

Explore GeoStudio

Perform sophisticated analyses with all eight GeoStudio products.

Learn More

Seamless integration, unparalleled analysis capabilities


The integrated GeoStudio software suite enables you to combine multiple analyses using different products into a single modeling project.


Use this approach to model construction sequences, establish initial conditions, perform sensitivity analyses, model complex time sequences, or simply decompose a complex problem into a number of smaller, more manageable analyses.


Learn More

What Our Customers Are Saying


 

I have been using GEO-SLOPE’s software for my geotechnical design since 1996, and I have found that the comprehensive formulation, constitutive models, and intuitive interface allow me to effectively and efficiently arrive at a realistic solution for many practical problems dealing with fluid flow, slope stability and stress and deformation modeling under static and dynamic loading conditions.

- Bibhuti B. Panda
Amec Foster Wheeler

 

We used GeoStudio to replicate measured pore water pressures and track factor-of-safety vs. time – even turning our modeled wick drains “on” and “off” to produce a failure at the same time and under the same conditions as actually occurred; that calibration analysis allowed us to model a reconstruction scenario with some 30,000 cubic yards of foam fill and predict/prescribe threshold pore water pressure and deformation values for field validation.

- Charles D. Hubbard
Braun Intertec

 

I was introduced to SLOPE/W after grad school when I joined a foundation engineering company in New York City and analyzed numerous cases for embankments at a major international airport. The SLOPE/W analyses and results were well received by the owner’s geotechnical consultant, and as a result, design and construction were approved to proceed. SLOPE/W is easy to use and saved me a lot of time while performing the analyses.  I have been a continuous user since.

- George L. Costa
Costa Consulting Engineers

News & Events

See all

Stockholm 2017 Geotechnical Modeling Workshop

Date:
Monday, April 24, 2017 — Wednesday, April 26, 2017
Category:
Workshop
Location:
Stockholm, Sweden

GEO-SLOPE International invites you to join us in Stockholm this April for our upcoming workshop. Sweden’s 700-year old capital city is made up of 14 islands across Lake Mälaren and connected by more than 50 bridges.

Our public workshops are well attended events where GEO-SLOPE clients from around the world gather to learn, enhance and fine-tune their numerical modelling skills under the guidance of GEO-SLOPE personnel.

Whether you wish to be introduced to the world of numerical modeling, or experiment with new types of analyses, this training event is designed for all experience levels.

By attending the workshop, you can:

  • Immerse yourself in hands-on modeling and sharpen your skills
  • Increase your understanding of geotechnical theory and fundamentals
  • Collaborate with highly experienced GEO-SLOPE engineers and engineering professionals from around the world

 


Click for a full-sized agenda

Format and Outline:

Time will be divided between lectures, hands-on work with GeoStudio software, and group problem-solving discussions. Participants will be exposed to a general review of geotechnical theory, as well as appropriate and efficient numerical modeling strategies.

The two/ three-day workshop will consist of focused sessions on SLOPE/W, SEEP/W and SIGMA/W.

Details:

Date: April 24-25/26, 2017

Fee: 2-day: US$1,100
         3-day: US$1,260

Price includes tuition, training materials, lunch, and light refreshments.

Scandic Klara
Slöjdgatan 7
111 57 Stockholm
Sweden
Tel: +46 08 517 266 00

Workshop Brochure

About the Presenters:

The GEO-SLOPE training team is a dynamic group of engineers and programmers who have strong presentation skills and many years of experience with geotechnical numerical modeling and program development.

Comments from Past Participants:

“The workshop was an excellent experience! The presenters really knew their stuff and made the whole thing very engaging and streamlined. The workshop was a very enjoyable experience.”

“The workshop was a great introduction to modeling for those looking to further their education.”

"This workshop decreased my learning curve considerably... it is excellent and a must for any serious GEO-SLOPE software user"

"Excellent staff that are sincerely interested in their clients concerns"

Registration

Complete the Registration Form and send it to GEO-SLOPE by:

Email
training@geo-slope.com 

Fax
+1 (403) 266-4851

Mail
#1400, 633-6th Avenue SW
Calgary, AB
Canada T2P 2Y5

Participants must bring their own laptop computer.

Our Guarantee: If you are not completely satisfied with the content of the workshop, please submit your reasons in writing within 30 days of the workshop and we will gladly refund your registration costs to you. 

- Paul Grunau, President, GEO-SLOPE International Ltd.