Engineering Support

Access a collection of engineering resources, videos and example files.

Recommended Viewing

View a selection of our recommended tutorial videos.

GeoStudio 2012: SLOPE/W Tutorial

Learn the basics of SLOPE/W with this introductory tutorial using GeoStudio 2012.

GeoStudio 2012: SEEP/W Tutorial

Learn the basics of SEEP/W with this introductory tutorial using GeoStudio 2012.

GeoStudio 2016: What's New

Learn about the new features in our latest release.

Example Files

Explore a selection of GeoStudio example usages.

Eurocode Design Case

SLOPE/W can be used to complete a stability analysis with the objective being to check an ultimate limit state in accordance with various limit state design approaches such as Eurocode 7, Norwegian Standard NS 3480, and British Standard 8006. The stability analysis is completed with partial factors applied to characteristic loads and soil strength parameters.

GSZ:(1) (2) (3)

Perched Water Table

This example demonstrates how to use SEEP/W computed pore-pressures in a SLOPE/W stability analysis.The problem creates a perched watertable under long term net infiltration of precipitation. This perched condition can only be properly handled by directly using the SEEP/W results in SLOPE/W.


Cubzac-les-Ponts, France

In the 1970’s, a series of test embankments were constructed on soft clay at Cubzac-les-Ponts in France. These full-scale field tests were well-instrumented and are well-documented, and consequently provide an excellent case history. Two of the embankments are the subject of this article.

GSZ: (1) (2)

TEMP/W Tutorial

This example illustrates the steps and procedures required for a heat transfer analysis with phase change using TEMP/W. The soil properties and boundary conditions have been selected for illustrative purposes only.


Download the Engineering Methodology books for free

Learn why and how to model using our products.


Stability modeling with SLOPE/W.

Download Book


Seepage modeling with SEEP/W.

Download Book


Stress-Deformation modeling with SIGMA/W.

Download Book


Dynamic modeling with QUAKE/W.

Download Book


Thermal Modeling with TEMP/W.

Download Book


Contaminant Modeling with CTRAN/W.

Download Book


Air Flow Modeling with AIR/W.

Download Book


Vadose Zone Modeling with VADOSE/W.

Download Book

Online workshops

A series of free training videos that replicate our onsite workshops are available online. Host your own geotechnical modeling workshop, either for a group of engineers, or for your individual training needs.

Learn more

On-site training

Our training programs go beyond what buttons to push. Modeling is more about trying to understand the processes involved than it is in predicting results. We teach engineering principles and how to apply that knowledge to the modeling process. All our training programs are custom designed, incorporating examples and projects directly applicable to a specific line of work.

Get in touch

Still need help?

Get in touch with our engineering team today.

Engineering Support is available only to customers who have purchased annual maintenance. Or explore our Technical Support resources.